Your first steps with your IQOS ILUMA i ONE

How to use your new IQOS ILUMA i ONE

1. Press and hold the ON/OFF button of your device for 4 seconds and then release. Your device status lights will turn ON slowly.

2. Before first use, fully charge your device for approx. 90 min following the enclosed Safety Warning & Instructions.

3. Slide to open the cap. Insert a SMARTCORE STICK™ up to the filter line, until the device vibrates and light(s) pulse(s).

4. Preheating happens automatically after 1st vibration or by pressing the button for 1 second. The device is ready to use after the 2nd vibration.

5. During use, the status lights will indicate the remaining time of your usage. When the device vibrates and the light flash, you have 2 last puffs or 30sec left.

6. Once your usage finished, remove the used SMARTCORE STICK™ and dispose as per Safety Warnings & Instructions.

7. Slide to close the cap.

For more details, see Important Information.

How to charge your IQOS ILUMA i ONE

1. Charge your device with AC power adaptor (sold separately) and cable for 90 min for full charge.

2. During charging, the strip lights on the device will pulse.

3. If your device is fully discharged, the first light may take a few seconds to start blinking yellow. Once the device goes over 7% of charge, the color of the blinking light will change from yellow to white.

4. While charging, the status light blinks, indicating the level of the charge:

a. All 4 strip lights turn solid white: 100% charge level

b. 3 strip lights turn solid white: 75% charge level

c. 2 strip light turn solid white: 50% charge level

d. 1 strip light turn solid white: 25% charge level

IQOS ILUMA i ONE Advanced features


FlexPuff


  • FlexPuff is a smart feature that can be managed in the IQOS App (it is activated by default on new device) and may extend your usage duration based on your usage pattern still within up to 6 minutes.

  • Your device will automatically analyze the stick and might activate FlexPuff.

  • If Flexpuff will be activated, then you will be granted with 4 extra puffs, that can be used within the remainder of the 6min.

  • FlexPuff is designed to work with tobacco sticks. Activation and number of puffs depend on individual usage patterns, thus extended usage might not apply to all adult consumers and/or uses.

  • When the device vibrates and the light flash, you have 2 last puffs or 30sec left.
  • IQOS ILUMA i ONE Usage tips

    Inserting SMARTCORE STICKS™

    Make sure you only use SMARTCORE STICKS™ with your IQOS ILUMA i ONE. They are single use, so ensure you do not reinsert a used one.

    Keeping battery power

    Charging your IQOS ILUMA i ONE device on a daily basis is the best way to ensure you can use your IQOS anytime. Always charge the device with the manufacturer-approved power adaptor (sold separately) and cable. AC power adaptor not included in the device box.

    Customizing your device

    Connect your IQOS ILUMA i ONE to the IQOS APP and customize your usage.

     IQOS ILUMA™ is designed to be used only with SMARTCORE STICKS™. Do not use IQOS ILUMA™ and SMARTCORE STICKS™ with previous IQOS™ generations, as this may cause damage to your device. Do not ingest or disassemble SMARTCORE STICKS™. This product contains a sharp metal part which can cause serious injury if swallowed. Keep out of reach of children and pets.

    IQOS ILUMA i ONE User Guide

    Our IQOS ILUMA i ONE User Guide will let you delve deeper into how your device works and how to use it.
    Do you have more questions related to IQOS?
    There are several ways you can reach us.
    In case of questions, reach out our Customer Care where you can contact directly our colleauges.
    Get in touch
    Write to us.
    Email us
    Your question might have already been asked before. Browse our FAQs to see if there’s an answer waiting for you.
    Look through our FAQ